Epson Stylus Pro 4000 Reference Manual page 269

Caution:
c
To avoid interrupting ink set change, observe the following:
❏ Do not turn off the printer.
❏ Do not open the top cover.
❏ Do not remove the rear cover.
❏ Do not move the paper lever to the released position.
❏ Do not remove the ink cartridges.
❏ Do not remove the maintenance tank.
❏ Do not unplug the power cord.
Note:
❏ If an electrical power failure occurs during this operation, turn the
printer on again. You can continue your procedure at the
breakpoint.
❏ Cleaning cartridges are required when changing ink sets. To check
the product code, see "Consumable Products" on page 338.
To change the ink set, follow these steps.
1. Make sure that READY is displayed on the LCD panel.
2. Press the Menu
3. Press the Paper Feed
MAINTENANCE on the LCD, and press the Menu
4. Press the Paper Feed
CHNG INK SET, and then press the Menu
button to enter SelecType mode.
or Paper Feed
or Paper Feed
Maintenance and Transportation
button to display
button.
button to display
button.
269
6
6
6
6
6
6
6
6
6
6
6
6