Epson Stylus Pro 4000 Reference Manual page 38

Registering the settings
To register the paper settings, follow these steps.
1. Load the paper which you want to check.
2. Press the Menu
3. Press the Paper Feed
CUSTOM PAPER.
4. Press the Menu
5. Press the Menu
Paper Feed
1 to No. 10) you want to register as the setting.
If you use Epson special media, select STANDARD, and skip to
the step 9. You do not have to make paper thickness setting
because STANDARD automatically determines paper thickness.
6. Press the Menu
Paper Feed
STANDARD, WIDER, or WIDE.
7. Press the Menu
setting, and THICKNESS PAT is displayed on the LCD.
8. Press the Menu
test printing pattern.
Paper thickness test pattern example:
1 2
9. Examine the printed pattern to determine which set of lines
are aligned (show the smallest gap), and note the
corresponding number.
38
The Control Panel
button to enter SelecType mode.
button to display PAPER NUMBER.
button, and press the Paper Feed
button to select STANDARD or the number (No.
button to display PLATEN GAP. Press the
or Paper Feed
button to save the selected platen gap
button again to print the paper thickness
3 4 5 6 7
smallest gap
or Paper Feed
button to select NARROW,
8 9 10 11 12
button to display
13 14 15 16
or