Epson Stylus Pro 4000 Reference Manual page 39

10. After printing the pattern, THICKNESS NUM is displayed. Press
Paper Feed
noted in step 9.
11. Press the Menu
12. CUT METHOD is displayed. Press the Paper Feed
Feed
FAST, or THIN PAPER, and press the Menu
13. PPR FEED ADJ is displayed. Press the Paper Feed
Feed
Menu
14. EJECT ROLLER is displayed. Select AUTO, SHEET, ROLL CURLED,
or ROLL NORMAL, and press the Menu
15. DRYING TIME is displayed. Press the Paper Feed
Feed
button.
16. SUCTION is displayed. Press the Paper Feed
Feed
17. M/W ADJ is displayed. Press Paper Feed
button to adjust MicroWeave. Increase the value to give
priority to printing speed. Decrease it to give priority to the
print quality.
18. Press the Menu
Selecting the registered settings
To select the registered settings, follow these steps.
1. Press the Menu
2. Press the Paper Feed
CUSTOM PAPER, and press the Menu
or Paper Feed
button to save the selected value.
button to select STANDARD, THICK, SLOW, THICK,
button to set the paper feed amount, and press the
button.
button to select time in seconds, and press the Menu
button to select either STANDARD, -1, -2, -3, or -4.
button to save the selected value.
button to enter SelecType mode.
button to select the number
or Paper Feed
button.
The Control Panel
or Paper
button.
or Paper
button.
or Paper
or Paper
or Paper Feed
button to display
1
1
1
1
1
1
1
1
1
1
1
1
39