Epson Stylus Pro 4000 Reference Manual page 283

3. Make sure that the ink compartment covers are closed. Then
use a soft brush to carefully clean away any dust or dirt inside
the printer.
4. Close the roll paper cover.
5. Open the top cover and use a soft brush to carefully clean
away any dust or dirt inside the top cover. Then close the
cover.
6. If the platen is dirty with ink, clean it with a soft, clean cloth
dampened with mild detergent.
7. If the outer case is dirty, clean it with a soft, clean cloth
dampened with mild detergent. Keep the ink compartment
covers closed to prevent water from getting inside.
8. If the inside of the printer accidentally gets soiled with ink,
wipe it off with a damp cloth.
Warning:
w
Be careful not to touch the gears inside the printer.
Caution:
c
❏ Never use alcohol or thinners to clean the printer; these
chemicals can damage the components as well as the case.
❏ Be careful not to get water on the printer mechanism or
electronic components.
❏ Do not use a hard or abrasive brush.
❏ Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person if lubrication is needed.
See "Contacting Customer Support" on page 344.
Maintenance and Transportation
6
6
6
6
6
6
6
6
6
6
6
6
283