Roll Paper Does Not Eject Properly - Epson Stylus Pro 4000 Reference Manual

For Mac OS X, check the Media Type setting in the Print
Settings selected in the Print dialog box. Make sure it is correct
for the paper you are using. See "Page Setup" on page 207
❏ Make sure that the platen gap setting matches your paper.
You can change the platen gap setting in the PRINTER SETUP
of the SelecType mode. See "PLATEN GAP" on page 22.
❏ For non-Epson special media, check the paper type selected
in the CUSTOM PAPER of the SelecType mode. See "Making the
paper settings" on page 37.
Whenever loading non-Epson special media, test if the paper
can be loaded correctly before printing.
To clear Paper jams, see "Clearing Paper Jams" on page 316.

Roll Paper does not Eject Properly

Try one ore more of these solutions:
❏ Roll paper is wound tightly and may feed with a curl. Flatten
it before you load it.
❏ Select Starwheel-Roll Curled as the Feed Roller Type in the
Paper Configuration dialog box. For Windows, see "Paper
Configuration" on page 61. For Mac OS 8.6 to 9.x, see "Paper
Configuration" on page 146. For Mac OS X, see "Paper
Configuration" on page 217.
Troubleshooting
7
7
7
7
7
7
7
7
7
7
7
7
315