11. While pushing in the side pin, turn the paper cutter cover to
the left to close the casing.
Note:
Make sure that the paper cutter cover is set correctly. Otherwise,
the paper may not be cut.
12. Make sure that CLOSE TOP COVER is displayed, then close the
top cover. The cutter holder moves to the home (far right)
position.
13. Wait until READY is displayed on the LCD.
Cleaning the Printer
To keep your printer operation at its best, you should clean it
thoroughly several times a year.
1. Make sure the printer is turned off and all the lights are off.
Then unplug the power cord.
2. Open the roll paper cover and remove the roll paper spindle.
Also remove any paper from the printer.
282
Maintenance and Transportation