Making The Borderless Setting - Epson Stylus Pro 4000 Reference Manual

Making the Borderless setting

You can print your data without margins on the paper.
For this printing mode, Epson recommends the following media
conditions.
Accommodate media width:
❏ 8 inch, 203.2 mm
❏ 210 mm (A4)
❏ Letter (8.5 in), 215.9 mm
❏ 10 inch, 254 mm
❏ 257 mm
❏ 297 mm (A3)
❏ 300 mm
❏ 12 inch, 304.8 mm
❏ 329 mm (Super A3/B)
❏ 13 inch, 330.2 mm
❏ 14 inch, 355.6 mm
❏ 400 mm
❏ 16 inch, 406.4 mm
❏ 420 mm (A2)
❏ 17 inch, 431.8 mm
Note:
❏ You cannot perform borderless printing on cut sheet media with a
width of 420 mm (A2).
❏ When printing on roll paper with a width of 8 inches or 420 mm
(A2), attach a spacer to the spindle. See "Attaching the spacer to the
spindle" on page 238.
❏ If your application has margin settings, make sure they are set to
zero before printing.
❏ When printing on cut sheet media, only the left and right margins
are set to zero.
❏ The ink may contaminate the platen of the printer. In this case, wipe
the ink away using a cloth.
Printing with Windows
3
3
3
3
3
3
3
3
3
3
3
3
75