This operation changes according to the Auto Cut settings.
Paper Source
Roll Auto Cut On
Roll Auto Cut On
Roll Auto Cut Off
Roll Auto Cut Off
Note:
When the Sheet
available.
INTERFACE
You can select the interface that receives your print data. When
you select AUTO, the printer automatically switches between
interfaces depending on which one is receiving data first. When
you select USB, IEEE1394, or OPTION, only the selected interface
receives your print data. If no more print jobs have been received,
the printer returns to an idle state after 10 seconds or more.
CODE PAGE
You can select the code page from PC437 (extended graphics) and
PC850 (multilingual).
Print Page Line
On
Off
On
Off
is selected as the paper source, this setting is not
Printer's Operation
Prints page line on the right
side only, and cuts paper
automatically after the print
job.
Does not print page lines, and
cuts paper automatically
after the print job.
Prints page lines on the right
side and below the data, but
does not cut paper
automatically after the print
job.
Does not print page lines nor
cut.
The Control Panel
1
1
1
1
1
1
1
1
1
1
1
1
23