Using The Roll Paper Belt; Cutting Roll Paper Or Printing Page Lines - Epson Stylus Pro 4000 Reference Manual

Now the printer is ready to print. While the printer is printing, do
not open the top cover. If the top cover is opened while printing,
the printer stops printing, and then restarts printing when the top
cover is closed. Stopping and restarting printing may reduce the
print quality.

Using the roll paper belt

The roll paper belt is packed with the optional 2/3 inch Dual Roll
Feed Spindle. You can also purchase the optional roll paper belt
If you use roll paper belt, tap the end of the roll paper belt lightly
on the roll paper. The belt will wrap itself around the roll paper.
To remove the roll paper belt, simply unwrap it from around the
paper. While you do not use the roll paper belt, keep it wound
around the end of the spindle.

Cutting roll paper or printing page lines

When your print job is finished, the printer cuts the roll paper
automatically or prints page lines around the printed data
according to your settings. You can make these settings using the
control panel or printer software.
Note:
❏ Printer driver settings usually overrides control panel settings. Use
your printer driver make settings whenever possible.
❏ When the printer cuts the printout, it may take a little time to
proceed with cutting after printing is finished.
244
Paper Handling