Call Forwarding Off-Premise - NEC 910i Installation And User Manual

Call Forwarding
OR
1. TALK + FUNCTION KEY (Call Forward to Station).
With Call Forwarding activated, the FUNCTION KEY will flash.
2. Dial Call Forwarding condition:
2 = Forward calls when extension is busy or not answered
4 = Forward calls immediately
6 = Forward calls when your extension is not answered
7 = Forward calls immediately to the destination with simultaneous ringing at both extensions (not for Voice
Mail)
0 = Cancel
3. Dial destination extension, Voice Mail master number or press Voice Mail key.
You cannot forward to a Department Group pilot number. Once forwarded, only the destination user can
place an Intercom call to you.
4. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
5. TALK to hang up.

Call Forwarding Off-Premise

Use Off-Premise Call Forwarding to forward your calls to an off-site location. Stay in touch when you're away from the office
by forwarding to your cellular phone, home office, hotel or meeting room.
To activate Call Forwarding Off-Premise:
1. TALK + *4.
When Call Forwarding is activated, the only indication will be stutter dial tone.
OR
1. FUNCTION KEY (Call Forward to Device).
With Call Forwarding activated, the FUNCTION KEY flashes.
2. Press 6 + Dial line access code.
Line access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group (1-9, 01-99 or 001-128) or #9 + Line
number (e.g., 05 or 005 for line 5).
3. Dial the outside number to which your calls should be forwarded.
4. HOLD.
5. TALK to hang up.
To cancel Call Forwarding Off-Premise:
1. TALK + *4.
OR
1. TALK + FUNCTION KEY (Call Forward to Device).
2. Press 6 + HOLD.
3. TALK to hang up.
2-18
i-Series System