NEC 910i Installation And User Manual page 96

Specifications
1. Do not run station cable in parallel with the AC source, telex or computer, etc. If the
cables are near cable runs to those devices, use shielded cable with grounded
shields or install the cable in conduit.
2. When cables must be run on the floor, use cable protectors.
3. The cable run must be a dedicated, isolated cable pair.
4. Use 1-pair twisted 24 AWG cable (2-pair cable if installing an optional desk phone),
cable run length not to exceed 2,000 feet.
Base Unit
Width
4 1/4"
Handset
Width
2 1/5"
Desktop Charger
Width
3 5/8"
Base Unit:
Handset:
Bandwidth:
Power Level:
Output Watts
Range:
3-4
Cabling Requirements
Mechanical Specifications
Depth Height
7 1/2" 2 1/4"
Depth Height
1 2/3" 8 2/3"
(with antenna)
Depth Height
4 1/4" 3 5/8"
Receive/Transmit Information
902 MHz to 928 MHz
902 MHz to 928 MHz
+ 500KHz (+/- 25 KHz)
60mW approximately
0.063
350' in an office facility
80,000 square feet in a warehouse facility
Weight
15.4 oz.
Weight
8.8 oz.
(with battery)
Weight
6.5 oz.