Station Call Coverage - NEC 910i Installation And User Manual

Speed Dial
Using System Speed Dial
To call a System Speed Dial number:
1. Press TALK.
You can preselect a line by then pressing a line key + CONF.
2. Dial System Speed Dial bin number.
-If the number includes a pause, you can press * to force dialing to continue.
-If you hear busy tone, press an idle line key. Your call dials out automatically.
OR
1. Press TALK.
To preselect a line, then press a line key + CONF.
2. Press System Speed Dial key (One-Touch key for system Speed Dial).
-If the number includes a pause, you can press * to force dialing to continue.
-If you hear busy tone, press an idle line key. Your call dials out automatically.
To chain two Speed Dial numbers:
1. Place first call using Speed Dial.
Wait for number to dial out.
2. Press CONF.
3. Press Speed Dial key of second number.
Do not dial a bin number.
OR
1. Place first call using Speed Dial.
Wait for number to dial out.
2. Press CONF.
3. Press One-Touch Speed Dial key of second number.
OR
1. Place first call using Speed Dial.
Wait for number to dial out.
2. Press CONF.
3. Dial Speed Dial bin number (50-59, 20-29).

Station Call Coverage

A Station Call Coverage key gives you one-touch call pickup, Transfer and Intercom for the assigned extension. A Call Coverage
key also shows you the status of the covered extension.
To place a call to your covered extension:
1. Press Call Coverage key.
-If you hear two beeps, go ahead and speak.
-If you hear ringing, wait for called party to answer.
2-64
When the key is ... The covered phone is ...
OFF
ON
Flashing Slowly
Flashing Fast
Idle
Busy
Ringing
In DND
Onyx VSi System