Prime Line Selection; Privacy Release Groups; Ringing Line Preference; Room Monitor - NEC 910i Installation And User Manual

Onyx VSi System
4. After you hear the beep, speak clearly and directly into the handset.
5. (Optional) Enter three-digit extension where calls will be transferred. Intercom dial tone will be heard.
6. Press TALK when you are through.
The MSG icon displays.
To cancel your Greeting:
1. Press TALK and dial #.
2. Press TALK or place handset in desktop charger to hang up.

Prime Line Selection

With Prime Line Selection, you automatically connect to an outside line when you press TALK. You can use your Prime Line for
placing or answering calls. Prime Line Selection simplifies handling calls on your most frequently-used line. Check with your
communications manager to see if you have a Prime Line.

Privacy Release Groups

If your extension is in a Privacy Release Group, you can enter another group member's outside call unannounced and uninvited.
Each member of the group can select Privacy. This prevents members from entering the call.
To join a conversation with a member of your Privacy Release Group:
1. Press TALK.
2. Press the desired line key.
The line key lights and the display reads "Conference Call" momentarily. You are connected to the two parties.
No more than two extensions in the Privacy Release Group can join the same call. You cannot enter a
Conference call using these steps.
To select privacy for the call you are on:
(Do not hang up.)
1. Press the flashing line key of the call you are on.
The line key stops flashing and you then have privacy for
the call.

Ringing Line Preference

Ringing Line Preference lets you answer outside calls by just pressing TALK. Ringing Line Preference simplifies the way you
answer calls. This helps if you use your phone primarily for answering calls. If more than one call is ringing, Ringing Line
Preference answers the call on the lowest numbered line first.
To answer an outside call:
1. Press TALK.
-The line key is lit.
-To place a call instead of answering the ringing call,
preselect a line before press TALK.

Room Monitor

Room Monitor enables you to monitor (listen to) the environmental sounds in an area or room containing a keyset extension.
Several extensions can monitor the same extension, however, a single extension cannot monitor more than one extension at a
time. If the extension being monitored is used while Room Monitor is activated, the feature is temporarily disabled.
To allow an extension to use Room Monitor, system programming must have the Monitor feature enabled in the Class of Service.
Room Monitor
2-61