System Features; Account Codes; Call Forwarding - NEC 910i Installation And User Manual

Onyx VSi System

Account Codes

For billing or other purposes, you can enter an Account Code (a number up to 10 digits long) to categorize your outside call.
This Account Code is included in a report that the system generates. You can enter an Account Code manually as described
below, or you can program a Function key for Account Code entry (refer to "Speed Dial"). This eliminates the need to place
your call on Hold while you enter the number.
If your system has Mandatory Account Codes, you must enter an Account Code for each long distance call you place. If your Account
Codes are also Verifiable, you must enter a code from a list programmed into your phone system. Ask your communications manager
which type of Account Codes you have.
To enter an Account Code when placing an outside call:
(You can program this on a Function key. See "Speed Dial".)
1. Place call.
2. Press # immediately after dialing the number.
3. Enter Account Code.
4. Press #.
To enter an Account Code for the call you are on:
(You can program this on a Function key. See "Speed Dial".)
(Do not hang up.)
1. Press CONF.
2. Press #.
3. Enter Account Code.
4. Press #.
5. Press HOLD.
You are reconnected to your call.

Call Forwarding

With Call Forwarding, you can reroute your incoming calls to another extension or to an outside number.
To forward calls:
(This may be programmed on a Function key. See "Speed Dial".)
1. Press TALK.
2. Press #.
3. Dial extension number to receive calls.
4. Press one of the following:
-"1" to forward calls not answered.
-"2" to forward calls not answered or when busy.
-"3" to forward all calls.
5. Press TALK or place handset in desktop charger to hang up.
ENVELOPE icon appears on the display.
To cancel Call Forwarding:
1. Press TALK.
2. Press #.
3. Press TALK or place handset in desktop charger to hang up.
ENVELOPE icon disappears.

System Features

Account Codes
2-51