Directly Entering A Fax Number; Using The Favorite List - Epson Aculaser CX16NF User Manual

❏ Using the phone book functions: List or search for recipients registered as speed dial numbers or
group dial numbers, and then select a recipient.
❏ Using the Redial/Pause key: Specify the number of the recipient dialed last.

Directly Entering a Fax Number

1. Use the numeric keypad to type in the fax number for the recipient.
Note:
❏ The keys that can be used to enter the fax number are: the number keys (0 through 9), and #.
If the Redial/Pause key is pressed while entering the fax number, a 2.5-second pause is added. A
pause appears as P in the message window.
❏ If the machine is connected to a PBX line and the prefix number (outside line access number) has
been specified in the COMM. SETTING, enter "#" to dial the outside line access number
automatically.
❏ To erase the entered number, hold down the Back key for about one second, or press the Stop/
Reset key.
2. Press the Select key.
3. Press the u or d key to select FINISH, and then press the Select key.
The destination is specified.
Note:
To erase the selected destinations, press the Stop/Reset key.

Using the Favorite List

If frequently specified speed dial destinations and group dial destinations are registered in the favorite
list, press the Addressbook key, and then press the u or d key to quickly select the desired
destination.
Note:
The destination must have been previously registered on the favorite list. For details, refer to "Registering
Destinations in the Favorite List" on page 53.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 23