Using The Redial Function; Specifying Multiple Recipients; Sending A Fax To Multiple Recipients (Broadcast Transmission) - Epson Aculaser CX16NF User Manual

Using the Redial Function

To send a fax to the last number dialed, press the Redial/Pause key to recall the fax number.
1. Press the Redial/Pause key. Check that the desired fax number appears in the message window.

Specifying Multiple Recipients

A fax can be sent to multiple recipients in a single transmission. There are two methods for sending a
fax to multiple recipients in a single transmission.
❏ Using group dial function
❏ Using Broadcast function

Sending a Fax to Multiple Recipients (Broadcast Transmission)

Directly type in multiple destinations, or select from the favorite list, speed dial destinations or address
book.
Note:
❏ A maximum of 236 destinations can be specified at one time.
❏ With the transmission result report, you can check whether the fax was sent to all recipients. For
details on the transmission result report, refer to "Checking the Transmission/Reception Result From
the Message Window" on page 63 and "About the Reports and Lists" on page 63.
1. Position the document to be faxed.
2. If desired, adjust the image quality.
Note:
The document image quality can be adjusted. For details, refer to "Adjusting the Image Quality" on
page 21.
3. Specify the fax number of the recipient.
❏ Direct dialing: Enter the fax number of the recipient directly using the keypad. Press the Select
key.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 27