Changing/Deleting Group Dial Information - Epson Aculaser CX16NF User Manual

9. Select FINISH, and then press the Select key.
The destinations are registered as the group dial destination.
Note:
To return to the Fax mode screen, continue pressing the Back key until the Fax mode screen appears,
or press the Stop/Reset key.

Changing/Deleting Group Dial Information

The registered group dial information can be changed.
1. Press the u or d key to select UTILITY, and then press the Select key.
Note:
For details on selecting a menu, refer to "General Procedure for Specifying Settings in Utility Menu"
on page 13.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select GROUP DIAL, and then press the Select key.
The GROUP DIAL screen appears.
4. Use the keypad to type in the number of the group dial destination to be edited/deleted, and then
press the Select key.
Note:
For details on entering/editing text and the characters that can be entered, refer to "Entering Text"
on page 74.
5. Press the u or d key to select EDIT or DELETE, and then press the Select key.
❏ If EDIT was selected, the name is displayed. Continue with step 6.
❏ If DELETE was selected, the settings programmed for the group dial number are deleted. This
completes the procedure when it is deleted.
6. If you want to change the name of the group, enter the new name, and then press the Select key.
Note:
For details on editing text, refer to "Entering Text" on page 74.
7. Add/delete destinations.
AcuLaser CX16NF Facsimile User's Guide
Registering Recipients 60