Other Problems; Error Messages On The Message Window - Epson Aculaser CX16NF User Manual

Symptom
Faxes cannot be
received
automatically.

Other Problems

Symptom
The number of
document pages
indicated in the
transmission result
report is different
from the number
of pages in a batch
transmission.

Error Messages on the Message Window

Error message
ADMINISTERED BY PC
PLEASE WAIT!
COMMUNICATION ERROR
(####)
Cause
The machine is set to receive
faxes manually.
Memory is full.
The telephone line is incorrectly
connected.
There may be a problem with the
caller's fax machine.
Cause
Memory is full.
Cause
This machine is accessing Local
Setup Program or the Admin.
Mode of EpsonNet Config.
❏
Communication is not
possible because of some
problem in the machine.
❏
Communication is not
possible because of a
problem with the recipient/
caller's fax machine.
AcuLaser CX16NF
Solution
Set the machine to automatic reception.
Load paper if it is empty, and then print the faxes stored in
memory.
Check the telephone line connection. If it is disconnected,
connect it.
Make a copy to check that this machine is operating
correctly, and then, if the copy was printed correctly, have
the recipient check the condition of their fax machine.
Solution
During batch transmission, the number of document pages
indicated in the transmission result report may be different
from the number of pages in the transmission if the memory
is full.
Solution
❏
Log off from EpsonNet Config.
❏
Exit Local Setup Program.
❏
If no operation is performed for 600
seconds, the main screen appears.
Check the transmission results.
Facsimile User's Guide
Troubleshooting 70