Using The Speed Dial Function - Epson Aculaser CX16NF User Manual

1. Press the Addressbook key.
Note:
The Addressbook key can be used if the main screen or Can Use AddressBook is displayed.
2. Press the u or d key to select the desired destination, and then press the Select key.
Note:
If a destination was incorrectly selected, press the Back key, press the Addressbook key, and then
select the correct destination.
3. When EDIT=Select appears, press the Select key again.
4. Press the u or d key to select FINISH, and then press the Select key.
The destination is specified.
Note:
❏ If a group dial destination was selected, multiple destinations are specified.
❏ To erase the selected destinations, press the Stop/Reset key.

Using the Speed Dial Function

If a recipient has been registered with a speed dial number, the recipient's fax number can be dialed
simply by pressing a speed dial number key.
Note:
The recipient must have been registered with a speed dial in advance. For details, refer to "Registering a
Speed Dial Destination" on page 55.
1. Press the Addressbook key 2 times.
Note:
The Addressbook key can be used if the main screen or Can Use AddressBook is displayed.
2. Use the keypad to type in the speed dial number (1-220), and then press the Select key.
Note:
❏ If a number was incorrectly entered, press the Back key, and then type in the correct number of
the speed dial destination.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 24