Sending A Fax To Multiple Recipients (Group Dial) - Epson Aculaser CX16NF User Manual

Sending a Fax to Multiple Recipients (Group Dial)

Multiple destinations can be selected with a group dial destination.
Note:
Multiple destinations must have been previously registered with a group dial destination. For details,
refer to "Registering a Group Dial Destination" on page 58.
1. Press the Addressbook key 3 times.
Note:
The Addressbook key can be used if the main screen or Can Use AddressBook is displayed.
2. Use the keypad to type in the group dial number (1-20), and then press the Select key.
Note:
❏ If a number was incorrectly entered, press the Back key, and then type in the correct number of
the group dial destination.
❏ If the entered group dial number is not registered with a fax number, the message NOT FAX NO.
appears. In addition, if the entered group dial number is not registered with a recipient, the
message NOT REGISTERED! appears. Enter a group dial number registered with a fax number.
3. When EDIT=Select appears, press the Select key again.
4. Press the u or d key to select FINISH, and then press the Select key.
Note:
To erase the selected destinations, press the Stop/Reset key.
5. Press the Start key.
The document is scanned, and then the fax is sent.
Note:
To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation to
cancel the setting. Select YES, and then press the Select key. If this is done, all selected recipients are
cleared.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 29