Using The List Function Of The Phone Book - Epson Aculaser CX16NF User Manual

❏ If the entered speed dial number is not registered with a fax number, the message NOT FAX NO.
appears. In addition, if the entered speed dial number is not registered with a recipient, the
message NOT REGISTERED! appears. Enter a speed dial number registered with a fax number.
3. When EDIT=Select appears, press the Select key again.
4. Press the u or d key to select FINISH, and then press the Select key.
The destination is specified.
Note:
To erase the selected destinations, press the Stop/Reset key.

Using the List Function of the Phone Book

If a recipient is registered with a speed dial number or a group dial number, the recipient can be found
by using the List or Search function of the phone book.
Follow the procedure described below to search using the List function of the phone book.
1. Press the Addressbook key 4 times.
Note:
The Addressbook key can be used if the main screen or Can Use AddressBook is displayed.
2. Check that LIST is selected, and then press the Select key.
The list of programmed speed dial numbers and group dial numbers is displayed.
3. Press the u or d key to select the desired destination, and then press the Select key.
Note:
If a destination was incorrectly selected, press the Back key, and then perform the operation again
from step 1.
4. When EDIT=Select appears, press the Select key again.
5. Press the u or d key to select FINISH, and then press the Select key.
Note:
To erase the selected destinations, press the Stop/Reset key.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 25