Receiver - Silvercrest SL 65 Operating Manual

Receiver

Caution!
Check that connections of all equipment and the antenna are
proper before connecting the receiver to the mains.
Insert the mains plug of the receiver in the mains socket.
The device is in standby mode. The numerical display of the receiver
is not illuminated (display dark).
Insert the mains plugs of the connected equipment in the mains
socket and switch them on.
Switch on the AV channel of the TV set.
Switch on the receiver via the red key on the top right on the
remote control.
The channel-location display of the receiver shines green.
The receiver is supplied with preprogrammed TV channels and can
be used directly. If you want to check if new channels are available,
initiate a scan for broadcasting stations. For this purpose, read the
information on page 26.
26