Figure 1.40 Display Of Errors Of [Power Control] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB Web-UI (Web User Interface) Operations
FIGURE 1.40 Display of Errors of [Power Control] Window
(1)
Menu Operation
[Partition] – [Power Control]
(2)
Window Operations
1.
Click the [Status Clear] button. Selects the power control items related to each partition from the pull-
down list of [Power Control]. Then click the [Apply] button.
Dialog box for setting confirmation appears.
2.
Click [OK] button to execute the settings.
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00075
Partition#aa cannot execute sadump
E_00077
Partition#aa cannot execute Power On.
E_00078
Partition#aa cannot execute Power Off.
E_00079
Partition#aa command failed
E_00080
Partition#%aa cannot execute Power Cycle.
E_00081
Partition#%aa cannot execute Reset.
E_00082
Partition#%aa cannot execute NMI.
E_00084
Partition#%aa cannot execute Force Power Off.
E_00091
Force Power Off Delay setting failed.
E_00101
Unable to power on the partition#%aa due to CPU mismatch between SBs.
I_00214
Unable to Power On the Partition#%aa because this Partition is under maintenance.
I_00222
Unable to %aa the Partition#%aa because this Partition is under maintenance.
E_00422
Unable to power on the partition#%aa due to CPU composition abnormal.
E_00154
Unable to power on due to mismatch between supply voltage and input voltage.
E_00482
Unable to power on the partition#%aa due to DIMM composition abnormal.
E_00491
Unable to power on the partition#%aa due to DIMM does not satisfy requirements of
Mode.
W_00504
The Power On failed, because of switching the Home SB.
Please execute it after a while again.
E_00517
Unable to power on the partition#%d due to abnormal SB composition.
Message
Advertisement
Table of Contents
