Mode] Window; Figure 1.112 [Mode] Window; Table 1.158 Display Items And Setting Items In [Mode] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
W_00473
I_00151
I_00417
W_00541
For details on the messages displayed on the window, see
(C122-E178EN).

1.7.13 [Mode] Window

Various modes can be set for system in [Mode] window. In order to reflect the set value, turn Off the power
of system and then it is necessary to turn On the Power of system once again.
When the [Apply] button is clicked while the system is powered on, a warning dialog box "W_00487 Unable
to change the mode, because this system is powered on" is displayed.
When the system is already powered off, the settings are reflected without displaying the dialog box.
The LAN Device Mode is displayed in IOU Unit comprised in the partition specified by the LAN Device Mode.
For settings, select LAN Device Mode in the IOU Unit, with the radio button and click the [Apply] button.

TABLE 1.158 Display Items and Setting Items in [Mode] Window

Items
Memory Operation Mode
(Current)
Unable to check the Video Redirection check box due to the Video Redirection option
is disabled.
Unable to control system power because maintenance is in progress. Release
maintenance mode first.
Are you sure?
Nothing is checked.

FIGURE 1.112 [Mode] Window

Displays the currently enabled Memory Operation Mode.

Performance Mode: Displays the settings to the Performance Mode.

Normal Mode: Displays the settings to the Normal Mode.

Partial Mode: Displays the settings to the Partial Mode.
PRIMEQUEST 2000 Series Message Reference
Description