Snmp Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Apply Sets the specified information on refresh.
Cancel Restores the original information and does not set the specified refresh information.
(1) Menu Operation
[Network Configuration] - [Refresh Rate]
(2) Window Operations
1. Specify [Enable] or [Disable] in [Refresh Rate].
If you select [Enable], enter the time interval.
2. Click the [Apply] button.
This sets the information for automatic refresh.
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013
W_00441
For details on the messages displayed on the window, see
(C122-E178EN).

1.5.6 [SNMP Configuration] window

The [SNMP Configuration] menu has the following windows:
[SNMP Community] window
[SNMP Trap] window
[SNMP v3 Configuration] window
[SNMP Community] window
You can configure SNMP in the [SNMP Community] window.
You can specify up to 16 items for [Community/User] from the MMB.
Setting completed.
Range over error.
Message
PRIMEQUEST 2000 Series Message Reference