Table 1.69 [Partition Configuration] Window Buttons - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Items
IOU

TABLE 1.69 [Partition Configuration] Window Buttons

Buttons
Set Partition Name
Add Unit
Remove unit
Home
Cancel
[Message]
This section describes the messages to be displayed on this window.
Message Number
I_00217 Unable to set Partition Name of Partition#%aa because this partition is under
maintenance.
I_00218 Unable to add SB/IOU to Partition#%aa because this partition is under maintenance.
I_00219 Unable to remove SB/IOU from Partition#%aa because this partition is under
maintenance.
I_00220 Unable to set Home on Partition#%aa because this partition is under maintenance.
I_00427 Select a partition.
I_00429 The partition is not defined.
W_00428 Only the alphanumeric character can be input to Partition Name area.
W_00575 Unable to change partition configuration because this partition is powered on.
For details on the messages displayed on the window, see
(C122-E178EN).
The operation method in the [Partition Configuration] window is described as follows.
[Set Partition Name] Button
The partition name is entered in each cell of [Partition Name], and when [Set Partition Name] button is
clicked, the name for each partition is set.
[Add SB/IOU to Partition] Window
When the partition is selected by using radio button of [Partition Configuration] window and when [Add Unit]
button is clicked, [Add SB/ IOU to Partition] window appears.
Displays the partition to which the IOU belongs.
Sets the name in the partition.
Displays the [Add Unit] window for incorporating the unit.
Displays the [Remove Unit] window for deleting the unit.
Displays the [Partition Home] window for setting the Home of Partition.
Returns to original status without setting the information.
Description
Description
Message
PRIMEQUEST 2000 Series Message Reference