Reserved Sb Configuration] Window; Figure 1.50 [Reserved Sb Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00022
W_00423
For details on the messages displayed on the window, see
(C122-E178EN).

1.3.5 [Reserved SB Configuration] window

In the [Reserved SB Configuration] window, the Partition which is to be considered as a Reserved SB for an
Free SB defined as Free or Reserved SB of the Partition, can be defined.
Reserved SB is an SB which is incorporated newly in the Partition, in place of a disconnected SB when the
SB which was incorporated in the Partition was disconnected due to hardware problems.
The background color of the un-mounted SB is displayed in gray.
In case of an eight Socket Model, check the number of CPUs of the SB which is incorporated in the specified
Partition while setting it in the Reserved SB, and check with the following mounting conditions.

Mounting of one CPU for a SB is possible only when the Partition is configured with one SB.

Mounting of two 2CPUs for a SB is mandatory when the Partition is configured with several SB.
The partition doesn't have a node.
The partition home cannot be changed while the partition is running.
Please try to change the partition home after the partition is shutdown.

FIGURE 1.50 [Reserved SB Configuration] Window

Message
PRIMEQUEST 2000 Series Message Reference