Operation Log] Window; System Information] Window; Table 1.135 [System Events Log Filtering Condition] Window Buttons - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB Web-UI (Web User Interface) Operations
Items
Start Date/ Time
End Date/ Time
Number of events to display
TABLE 1.135 [System Events Log Filtering Condition] Window Buttons
Buttons
Apply
Cancel
Default Setting
[Message]
This section describes the messages to be displayed on this window.
Message Number
W_00413
W_00414
W_00426
W_00434
W_00441
I_00417
I_00468
For details on the messages displayed on the window, see
(C122-E178EN).
1.7.3 [Operation Log] Window
As for the display, the operation is the same as the PRIMEQUEST 2400E/2800E model. Refer to chapter
1.2.3.
1.7.4 [System Information] Window
[System Information] window displays the information, such as name of the systems and name of the
products etc., related to the PRIMEQUEST 2800B model.
Moreover, names and Asset Tag (Property management number) corresponding to the PRIMEQUEST
2800B model(Chassis) can be set.
·
Old event first
The default setting is New event first.
Specifies either display from recent event or specify the time, by using the
radio button.
·
First event: Display by recent event
·
Specified Time: Specify the time. In case of Specified Time, enter the
Start Date and Time.
The default setting is First event.
Specifies either display till last event or specify the time, by using the radio
button.
·
Last event: Display till Last event
·
Specified Time: Specify the time. In case of Specified Time, enter the
End Date and Time.
The default setting is Last event.
Specifies the number of log to be displayed. As for the denominator, display
the total number of events that are logged.
A maximum of 3000 events can be specified.
The default setting is 100 events.
Log which matches with the specified conditions will be listed on [System Event Log]
window by clicking the [Apply] button.
Returns to [System Event Log] window by clicking the [Cancel] button.
Selected value returns to the default value.
Nothing is selected.
Invalid Date Format.
Invalid Values Specified.
Invalid Time Format.
Range over error.
Are you sure?
Are you sure you want to clear the SEL?
Description
Description
Message
PRIMEQUEST 2000 Series Message Reference
Advertisement
Table of Contents
