Alarm E-Mail] Window; Table 1.122 Buttons In The [Add Filter] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Items
Subnet Mask/
Prefix Length
Buttons
Apply Sets the specified information.
Cancel Restores the original information and does not set the specified information, such as protocols
and access control.
(1) Menu Operation
[Network Configuration] - [Access Control] - [Add Filter] button/[Edit Filter] button
(2) Window Operations
1. Specify [Protocol] and [Access Control].
2. If you specify [Enable] in [Access Control], enter values for [IP Address] and [Subnet Mask]. Then, click
the [Apply] button.
If you specify [Disable] in [Access Control], simply click the [Apply] button.
This adds or edits the filter.
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013
W_00432
For details on the messages displayed on the window, see
(C122-E178EN).

1.5.11 [Alarm E-Mail] window

You can set e-mail notification for when an event occurs in the PRIMEQUEST 2000 series server in the
[Alarm E-Mail] window.
For IPv4, the subnet mask of the IP address that has permission to connect is displayed.
For IPv6, the prefix length is displayed.

TABLE 1.122 Buttons in the [Add Filter] window

Setting completed.
Invalid IP Address specified.
Description
Description
Message
PRIMEQUEST 2000 Series Message Reference