Figure 1.55 [Mode] Window; Table 1.80 Display Items And Setting Items In [Mode] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
[Mode] Window
Various modes can be set for partition in [Mode] window. In order to reflect the set value, turn Off the power
of partition and then it is necessary to turn On the Power of partition once again.
When the [Apply] button is clicked while the partition is powered on, a warning dialog box "W_00487 Unable
to change the mode, because this partition is powered on" is displayed.
When the partition is already powered off, the settings are reflected without displaying the dialog box.
When SB with DIMM configuration that does not satisfy requirements of Mode configures the Mode for the
partition configured in a Reserved SB, a confirmation dialogue box is displayed. At the time of switching to
the Reserved SB, a warning message of Mode cancellation is displayed and to confirm whether to proceed
with the setting or not.
The LAN Device Mode is displayed in IOU Unit comprised in the partition specified by the LAN Device Mode.
For settings, select LAN Device Mode in the IOU Unit, with the radio button and click the [Apply] button.

TABLE 1.80 Display Items and Setting Items in [Mode] Window

Items
Memory Operation Mode
(current status)
Memory Operation Mode
(setting)

FIGURE 1.55 [Mode] Window

Displays the currently enabled Memory Operation Mode.

Performance Mode: Displays the settings to the Performance Mode.

Normal Mode: Displays the settings to the Normal Mode.

Partial Mode: Displays the settings to the Partial Mode.

Full Mode: Displays the settings to the Full Mode.

Spare Mode: Displays the settings to the Spare Mode.
Sets the Memory Operation Mode for partition.

Performance Mode

Normal Mode

Partial Mode

Full Mode

Spare Mode
Enables the settings after rebooting the partition.
Default setting is Normal Mode.
Description