Installing And Setting Device Drivers - NEC Express5800 User Manual

5-22 Installing the Operating System with Express Setup

Installing and Setting Device Drivers

Follow these steps to install and configure the device drivers.
LAN Driver and PROSet
The LAN driver and PROSet have been installed automatically while your system was being
updated in the previous section.
NOTE: To change the LAN driver and PROSet settings, log on to the
system from a local console using an administrator account. Remotely
changing the settings by using the operating system's remote desktop
feature is not supported.
Network Driver
Specify the details of network driver.
Two standard network drivers that are mounted will be installed automatically, but the link speed
and Duplex mode need to be specified manually.
1.
Open the [Device Manager].
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link Speed] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4.
Click [OK].
5.
Restart the system.
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be
appeared from [Network and Dial-up Connection].
NOTE: We recommend you to add [Network Monitor] at [Adding
Services].
[Network Monitor] can monitor the frame (or the packet) that the
computer installing [Network Monitor] sends or receives. This tool is
valuable when analyzing network trouble. For information on how to
install the tool, see the "Setting for Solving Problems" described later
in this chapter.