Network Driver; Optional Network Board Driver (N8104-121/125A/126 - NEC Express5800 User Manual

D-22 Installing Windows Server 2008 R2

Network Driver

Specify the details of network driver.
Two standard network drivers that are mounted will be installed automatically, but the link speed
and Duplex mode need to be specified manually.
1.
Open the [Device Manager]
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link Speed] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4.
Click [OK].
5.
Restart the system
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be
appeared from [Network and Dial-up Connection].
NOTE:
Services].
[Network Monitor] can monitor the frame (or the packet) that the
computer installing [Network Monitor] sends or receives. This tool is
valuable when analyzing network trouble. For information on how to
install the tool, see the "Setting for Solving Problems" described later in
this chapter.

Optional Network Board Driver (N8104-121/125A/126)

The drivers for Optional Network Board Driver (N8104-121/125A/126) are automatically installed
by Windows Plug-and-Play. You do not need to install them manually.
We recommend you to add [Network Monitor] at [Adding