NEC Express5800 User Manual page 473

9.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 32-bit)] and press Enter.
IMPORTANT:
the N8103-75/107 SCSI controller, press S.
The screen of Step 5 is displayed.
Go to Step 10.
10.
<If the SCSI Controller N8103-95 is connected>
Press S.
IMPORTANT:
Insert the Windows Server 2003 OEM-Disk for
EXPRESSBUILDER into the floppy disk drive. If the floppy disk
drive has already contained Windows Server 2003 OEM-Disk for
EXPRESSBUILDER, you do not need to insert the Windows Server
2003 OEM-Disk for EXPRESSBUILDER.
If you have created the OEM-Disk into the Flash FDD, connect the
Flash FDD before you start the system.
The screen of Step 6 is displayed. Press Enter, and go to Step 11.
<If the SCSI Controller N8103-95 is not connected>
Go to Step 12.
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra320 SCSI Cards (Windows
32-bit)"
Unless the device manufacturer prefers that
you use the driver on the floppy disk, you
should use the driver in Windows.
Installing Windows Server 2003 G-9