Peripheral Configuration - NEC Express5800 User Manual

4-14 Configuring Your Server
PCI Device, Onboard VGA
Option
Onboard VGA
Option ROM Scan
PCI Device, Onboard Lan
Option
LAN Controller
LAN Option ROM
Scan

Peripheral Configuration

IMPORTANT:
overlapped with others.
Option
Serial Port A
Base I/O
address
Interrupt
Serial Port B
Base I/O
address
Interrupt
SATA RAID
Enable
Parameter Description
[Auto] Selects whether the option ROM of
Force onboard video controller is executed
automatically for forcedly.
When [Auto] is selected, the ROM of the
VGA card is preferentially scanned.
Parameter Description
Disabled Enables or disables onboard LAN
[Enabled] controller.
Disabled Enables or disables an option ROM of
[Enabled] onboard LAN controller.
Note that the interrupt and/or base I/O address are not
Parameter Description
Disabled Selects whether serial port A is enabled or
[Enabled] disabled.
[3F8h] Selects the base I/O address for serial port
2F8h A.
3E8h
2E8h
IRQ 3 Selects the interrupt for a serial port A.
[IRQ 4]
Disabled Selects whether serial port B is enabled or
[Enabled] disabled.
3F8h Selects the base I/O address for serial port
[2F8h] B.
3E8h
2E8h
[IRQ 3] Selects the interrupt for a serial port B.
IRQ 4
[Disabled]
Indicates whether the RAID disk drives that
Enabled
uses the onboard SATA is enabled or
disabled. (View only)
To enable or disable the RAID system, use
the jumper switch on mother board.
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set