NEC Express5800 User Manual page 271

The Telnet Service is not installed.
→ Adjust the computer name to 14 characters or less, and then install the Telnet Service
according to <How to install the Telnet Service>.
<How to install the Telnet Service>
1.
Click [Run] on Start menu.
2.
Type "tlntsvr /service" in the [Open] box, and click [OK].
3.
Click Start menu, point to [Control Panel] and click [Computer Management] and then
click the [Services] to specify whether the Telnet Service is registered.
* When the installation of Telnet Service is finished, there is no problem if the computer
name is set to 15 characters or more.
Power ON/OFF (Wake On LAN) feature does not work:
→ Immediately after the AC power is turned on, the Remote Power ON/OFF feature
(Wake ON LAN) is disabled. Start Windows 2003 once, provide settings as shown
below, then shutdown the system. After restart, the Remote Power On/Off feature is
available unless the AC power is turned off.
Select [Start] → [Administrative Tools] → [Computer Management].
Select Device Manager, double-click [Intel(R) PRO/1000EB Network Connection
with I/O Acceleration #n] under Network Adapter, and specify as follows in [Detail]
tab.
PME:
Wake On:
The system time lags:
→ If you do not use the server that adjusts time such as NTP (Network Time Protocol)
Server, the system time may differ from actual time.
In this case, use NTP server or disable "Windows Time Service".
Fail to access to USB devices on Windows Server 2003 x64 Edition or Windows Server 2003:
Did you apply [Hotfix for Windows x64 "KB921411"] or [Hotfix for Windows Server
2003 (KB921411)] prior to the "Updating the System" process?
Specify whether "!" is displayed or not on the USB root hub.
<verification process>
Click Start menu, right-click [My Computer], and click [Manage] to start Device
Manager.
And then, select [Device Manager] from the left side window.
→ If "!" is displayed on the USB root hub, apply the Hotfix according to the
"Recovery process".
For "Recovery process", see Appendix F or Appendix G for details.
[ON]
[Magic Packet]
Troubleshooting 8-25