NEC Express5800 User Manual page 344

9-54 Upgrading Your Server
7.
Insert a file device into the file bay.
8.
Align the screw holes on the device with those on the file bay and secure the device by
using the two screws provided with the servver.
Screw Set 504
9.
Connect the interface and power cables to the 5.25-inch device. See Chapter 10 for
details.
10.
Assemble the server.
11.
If a SCSI device is installed, set the parameters including the transmission rate using the
BIOS utility of the SCSI controller.
Refer to the manual provided with the SCSI controller for details.