Table of Contents
Advertisement
VIPedge
Feature Operations
Call Forward Settings
Station Call Forward
Procedures
30
Notes:
Call Forward Any Call and Call Forward-Incoming line can be set
•
simultaneously on a telephone. This allows incoming line calls to be
forwarded to a different destination than all of the other types of calls.
Call Forward destinations can be set to internal destinations or an
•
outside telephone number.
Call Forward All Calls
•
Call Forward Busy/Do Not Disturb
•
your extension is busy or in Do Not Disturb (DND) mode.
In Tone-first systems with multiple lines, Call Forward Busy forwards calls
•
only when all line appearances are in use. In Voice-first systems, Call
Forward Busy forwards all calls any time your telephone is in use.
Call Forward - No Answer –
•
number of rings. The preset number of rings can be set on a per user
basis.
Call Forward Busy/Do Not Disturb/No Answer –
•
when you are busy, in DND mode or when you don't answer a call within
a preset number of rings.
Call Forward Cancel
•
each category of Call Forward has a different code for canceling.
You can register a Call Forward function by entering the button sequence as
described or by programming a Programmable Feature Button to perform the
sequence.
To use the Call Forward button sequence:
Follow the instructions in
•
features require additional input, such as:
•
Dest. Ext. or Telephone No.
can be internal extension numbers or outside telephone
numbers. If the destination is an outside number, enter the
access code used for dialing out (such as 9) + the telephone
#
number +
of up to 32 digits.
•
– Enter the number of seconds (08~60) your telephone
Timer
should ring before forwarding the call. (This is the Call Forward-
No Answer timer.)
•
Call Forward Pass Code
can be set up by your System Administrator and will allow one
station to activate the call forward setting for another station.
Users must enter the Call Forward pass code for the station to be
forwarded.
To program call forward button destination using the EMPA.
Login to your EMPA and select Call Forward to turn selections on and off.
Select Home to program the button.
TOSHIBA
– Forwards all calls immediately.
– Forwards calls immediately when
Forwards unanswered calls after a preset
– Cancels the set Call Forward feature. Notice that
"Call Forward Examples" on page
– Call Forward destination numbers
. The telephone system accepts destination numbers
– A four-digit Call Forward pass code
Forwards all calls
31. Some
VIPedge UG
12/12
Advertisement
Table of Contents
