VIPedge
The Basics
Answering a Call
Handset
Speaker
Shift Button
Handsfree
Answerback
20
There are several ways to answer a call:
When the telephone is programmed for Ringing Line Preference, pick up the
handset and the telephone automatically answers the ringing line.
... or press the button associated with the ringing line (flashing green LED).
When the telephone is programmed for Ringing Line Preference, press Spkr
and the ringing line is answered.
... or press the button associated with the ringing line (flashing green LED).
Once connected, continue using the speakerphone or lift the handset.
Available on a 9-line display telephone only.
If the LCD screen is set to view Buttons 11~20 and a call comes in on Button
1 the phone will ring and Caller ID information will display on the top of the
screen, press the "Shift" Button to view Buttons 1~10 and answer the call.
With speakerphone enabled, the telephone may be programmed for
Handsfree Answerback. The called party hears a single long tone, followed by
the caller's voice. Begin hands free conversation. If Handsfree Answerback
were not programmed, the called party could hear the calling party speak but
would not be able to answer them without answering the call manually.
Notes:
The extension LED flashes green, the Microphone LED lights steady red
•
and the Speaker LED flashes Red.
In order to perform any additional functions with this call (like a transfer or
•
hold) the call must be properly answered to gain full call control. Perform
the same steps you normally would to answer a call: press the Spkr
button, the flashing DN button or lift the handset.
Handsfree MIC setting needs to be enabled by your System
•
Administrator.
TOSHIBA
VIPedge UG
12/12