Panasonic WV-SW390 Series Operating Instructions Manual page 112

11 Configure the settings relating to images and audio [Image/Audio]
SW396
Position
[Left end position setup]
Move the camera to the desired point to be set as the left end position point of the auto panning using the
control pad/buttons and adjust the image using the [Zoom] buttons and the [Focus] buttons.
The zoom and focus settings are set together with the start point.
Note
•
Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab.
•
Adjusted zoom and focus position for the auto pan function will be applied when [Set] button of "Start
position" is clicked.
[Right end position setup]
Move the camera to the desired point to be set as the right end position point of the auto panning using the
control pad/buttons, and then click the [Set] button to register the position as the right end position.
[Start position]
Move the camera to the desired point to be set as the start point of the auto panning using the control pad/
buttons and adjust the image using the [Zoom] buttons and the [Focus] buttons.
The zoom and focus settings are set together with the start point.
Note
•
Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab.
•
Adjusted zoom and focus position for the auto pan function will be applied when [Set] button of "Start
position" is clicked.
112 Operating Instructions
SC386
SW396 SC386
SW396
SW395 SC385 SC384
SC386
SW395 SC385 SC384