Panasonic WV-SW390 Series Operating Instructions Manual page 20

2 Monitor images on a cellular phone/mobile terminal
Functions
D Resolution control
E Image quality
control
F Home position
G Preset
*2
H AUX control
Note
•
When the HTTP port number is changed from "80", enter "http://IP address: (colon) + port number/
mobile" in the address box of the browser.
*1
•
When using the DDNS function, access to "http://Host name registered in the DDNS server: (colon) +
port number/mobile".
•
When "HTTPS" is selected for "HTTPS" - "Connection" on the [Network] tab of the "Network" page,
enter as follows.
"https://IP address: (colon) + port number/mobile" or "https://Host name registered in the DDNS server:
(colon) + port number/mobile"
•
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the cellular phone in use, password entry may be required each time the
screen is switched.
•
It is impossible to transmit/receive audio using a cellular phone.
20 Operating Instructions
Changes the image capture size by pressing the dial key "0".
•
Image in the aspect ratio of "4:3"
•
Image in the aspect ratio of "4:3
(VGA)"
•
Image in the aspect ratio of "4:3
(800x600)"
•
Image in the aspect ratio of
"16:9"
Note
•
Some cellular phones cannot change the image capture size even
when resolution is changed by resolution control.
It is possible to change the image quality between "Quality1" and
"Quality2". (®page 76)
The camera will move to the home position (®page 90). Home position
*2
will be displayed only when home position is set.
The camera will move to the designated preset position to display images
by pressing the dial key corresponding to the desired channel. (The dial key
numbers are not displayed for Preset No 5 or greater. Only preset IDs will
be displayed for them.) (®page 108)
Controls the AUX terminal.
*2
These buttons will be displayed only when "AUX output" is selected for
"Terminal 3" on the setup menu. (®page 129)
Outline of functions
Changes the image capture size
between 320x240 (default) and
640x480.
Changes the image capture size
between 320x240 (default) and
640x480.
SW396
SC385
Changes the image capture size
between 320x240 (default) and
640x480.
SW396
SC385
Changes the image capture size
between 320x180 (default) and
640x360.
SC384
SW395 SC386
SW395 SC386