Panasonic WV-SW390 Series Operating Instructions Manual page 125

Note
•
The other i-PRO series products do not support "G.711" unless otherwise stated. (As of August, 2011)
•
G.711 is available only when "Mic input" is selected for "Audio transmission/reception".
[Audio bit rate]
Select "16kbps" or "32kbps" for the audio bit rate used to transmit/receive audio data.
•
Default: 32kbps
Note
•
When selecting a smaller value for "Bandwidth control(bit rate)" (®page 160) while putting a priority
on the JPEG/H.264(MPEG-4) image transmission, select "16kbps" for "Audio bit rate".
•
[Audio bit rate] is unavailable when "G.711" is selected for "Audio encoding format".
[Mic input volume (Camera to PC)]
Select a volume level on the PC to hear audio transmitted from the camera.
•
Mic High: The volume level will become high. This setting will be applied when audio is input to the camera
using a microphone.
•
Mic Middle: The volume level will become middle. This setting will be applied when audio is input to the
camera using a microphone.
•
Mic Low: The volume level will become low. This setting will be applied when audio is input to the camera
using a microphone.
•
Line High: The volume level will become high. This setting will be applied when audio is input to the camera
using the Line input.
•
Line Middle: The volume level will become middle. This setting will be applied when audio is input to the
camera using the Line input.
•
Line Low: The volume level will become low. This setting will be applied when audio is input to the camera
using the Line input.
•
Default: Mic Middle
[Mic input interval (Camera to PC)]
Select an interval for audio reception from the following.
20ms/ 40ms/ 80ms/ 160ms
•
Default: 40ms
Note
•
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio transmitted from the PC.
High/ Middle/ Low
•
Default: Middle
[Audio output interval (PC to Camera)]
Select an interval for audio transmission from the following.
160ms/ 320ms/ 640ms/ 1280ms
•
Default: 640ms
Note
•
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 125