Panasonic WV-SW390 Series Operating Instructions Manual page 131

The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to
pages 129, 133 and 136 for further information about the settings relating to the alarm, the alarm image and
the alarm output terminal.
Camera action on alarm
[Terminal alarm 1]
Select an action to be taken when a terminal alarm 1 is detected from the following.
•
Off: Does not take any action even when a terminal alarm 1 is detected.
•
1-64
SW395 SC385
to the selected preset position when a terminal alarm 1 is detected.
•
Auto track
SW395
•
1-256
SW396 SC386
detected, the camera will move to that position.
•
Auto track
SW396
•
Patrol 1
SW396
* If Patrol 1 is not registered it is not displayed on the screen.
•
Default: Off
[Terminal alarm 2]
Select an action to be taken when a terminal alarm 2 is detected from the following.
•
Off: Does not take any action even when a terminal alarm 2 is detected.
•
1-64
SW395 SC385
to the selected preset position when a terminal alarm 2 is detected.
•
Auto track
SW395
•
1-256
SW396 SC386
detected, the camera will move to that position.
•
Auto track
SW396
•
Patrol 2
SW396
* If Patrol 2 is not registered it is not displayed on the screen.
: When the registered preset position is selected, the camera will move
SC384
: When a terminal alarm 1 is detected, the camera will start the auto tracking.
SC385
: If a previously registered preset position is selected, when a terminal alarm 1 is
: When a terminal alarm 1 is detected, the camera will start the auto tracking.
SC386
: When a terminal alarm 1 is detected, the camera will start the patrol.
SC386
: When the registered preset position is selected, the camera will move
SC384
: When a terminal alarm 2 is detected, the camera will start the auto tracking.
SC385
: If a previously registered preset position is selected, when a terminal alarm 2 is
: When a terminal alarm 2 is detected, the camera will start the auto tracking.
SC386
: When a terminal alarm 2 is detected, the camera will start the patrol.
SC386
13 Configure the alarm settings [Alarm]
Operating Instructions 131