Panasonic WV-SW390 Series Operating Instructions Manual page 26

2 Monitor images on a cellular phone/mobile terminal
AUX control
Press the
output terminals can be controlled with the
This function is only displayed when [Terminal 3] is set to [AUX output] on the settings menu.
(®Page 129)
Note
•
When the HTTP port number is changed from "80", enter "http://IP address: (colon) + port number/
cam" in the address box of the browser.
*1
•
When using the DDNS function, access to "http://Host name registered in the DDNS server: (colon) +
port number/cam"
•
When "HTTPS" is set in "HTTPS" - "Connection" on the [Network] tab of the "Network" page, enter the
following:
"https://IP address: (colon) + port number/cam" or "https://Host name registered in the DDNS server:
(colon) + port number/cam".
•
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the mobile terminal in use, password entry may be required each time the
screen is switched.
•
It is impossible to transmit/receive audio using a mobile terminal.
•
Depending on the mobile terminal in use, larger size images may not be displayed. In this case,
selecting "Low" for "Image quality setting" of "JPEG" (®page 76) may sometimes solve this problem.
•
Depending on the mobile terminal in use or its contract plan, it may be impossible to access.
*1 IP address is the global WAN IP address of the router that can be accessed via the Internet. However, when accessing the same
LAN as the camera with a wireless compatible mobile terminal, the IP address is the local IP address.
*2 Only when accessing the camera through the Internet.
26 Operating Instructions
F
button to display the buttons used to operate the AUX output on the screen. The AUX
.
*2
and buttons.