Panasonic WV-SW390 Series Operating Instructions Manual page 30

4 Action at an alarm occurrence
IMPORTANT
•
Select "FTP error" for "Save trigger" on the [SD memory card] tab when using the SD memory card.
When "Alarm input" or "Manual" is selected for "Save trigger", an alarm image will not be transmitted
at an alarm occurrence to the FTP server.
Notify of alarm occurrences by e-mail
Alarm mail (alarm occurrence notification) can be sent at an alarm occurrence to the e-mail addresses
registered in advance. Up to 4 addresses can be registered as recipients of the alarm mail. An alarm image
(still picture) can be sent with the alarm mail as an attached file. The settings for alarm mail can be configured
in the "Mail notification" section on the [Notification] tab of the [Alarm] page (®page 141) and the [Mail] tab of
the "Server" page (®page 155).
Notify of alarm occurrences to the designated IP addresses (Panasonic
alarm protocol notification)
This function is available only when a Panasonic device, such as the network disk recorder, is connected to
the system. When "On" is selected for "Panasonic alarm protocol", the connected Panasonic device will be
notified that the camera is in the alarm state. The settings for Panasonic alarm protocol can be configured in
the Panasonic alarm protocol section of the [Notification] tab of the [Alarm] page. (®page 143)
30 Operating Instructions