Panasonic WV-SW390 Series Operating Instructions Manual page 198

18 Configure the settings relating to the schedules [Schedule]
•
Access permission: Users whose access level is set to 2 and 3 on the "User auth." tab
(®page 150) can access the camera only in the period of schedule.
•
H.264 recording: The SD recording will be performed at the designated time in the schedule.
•
Position refresh: The camera position will be refreshed at the designated time in the schedule.
•
1-64
SW395
designated time in the schedule.
•
1-256
SW396
time in the schedule.
Note
•
Select "On" for "User auth." on the [User auth.] tab of "User mng." page (®page 150) and "Off" for
"Host auth." on the "Host auth." page (®page 151) to validate "Access permission".
•
When selecting "H.264 recording", select "H.264" for "Recording format" on the [SD memory
card] tab and select "Schedule" for "Save trigger". (®page 54)
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of "24h".
4.
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the window.
Note
•
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
198 Operating Instructions
: The camera will move to the designated preset position at the
SC385 SC384
: The camera will move to the designated preset position at the designated
SC386