Image Hold; Digital Zoom - Panasonic WV-SW390 Series Operating Instructions Manual

[Self return time]
Select a waiting time (amount of time until the camera starts the selected operation after the end of the manual
operations) from the following.
10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min
•
Default: 1min

[Image hold]

Select "On" or "Off" to determine whether or not to hold the still image on the screen (that is displayed at the
last moment before the camera started to move to a preset position) until the camera has moved to the preset
position.
•
On: A still image will be held on the screen until the camera has moved to the preset position.
•
Off: Images from the camera will be displayed even when the camera is moving to the preset position.
•
Default: Off
[Upside-down]
SW396
Select "On" or "Off" to determine whether or not to turn the image upside-down.
•
On: The image is turned upside-down.
•
Off: The image is not turned upside-down.
•
Default: Off
IMPORTANT
•
Only use the upside-down function to check the image before installing the camera. Set this function
to "Off" after installing the camera.
[Upside-down]
SW395
Select "On (desktop)" or "Off (ceiling)" to determine how the camera is to be installed.
•
On (desktop): Select this when the camera is to be installed with the dome side up.
•
Off (ceiling): Select this when the camera is to be installed with the dome side down.
•
Default: Off (ceiling)
[Extra optical zoom]
Select the extra optical zoom setting from the following.
•
SW395 SC385
On (Max X36): Images can be zoomed in on with the optical zoom (1x - 18x) and the extra optical zoom
(higher zoom factors, up to 36x).
Off (Max X18): Does not use the extra optical zoom.
Default: On (Max X36)
•
SW396 SC386
On (Max X72): Images can be zoomed in on with the optical zoom (1x - 36x) and the extra optical zoom
(higher zoom factors, up to 72x).
Off (Max X36): Does not use the extra optical zoom.
Default: On (Max X72)
About extra optical zoom
Among approx. 1.3 megapixel image capture area of the MOS image sensor, the central part of approx. 0.31
megapixels is extracted for shooting. That enables the shooting with a higher zooming effect. When the image
capture size under "VGA" is applied, the zoom factor can be adjusted up to 36x
72x
SW396 SC386

[Digital zoom]

Select the digital zoom setting from the following.
•
On (Max X288)
SC384
(up to 36x) and the electronic zoom (higher zoom factors, up to 288x).
11 Configure the settings relating to images and audio [Image/Audio]
SC386
SC385
SC384
.
: Images can be zoomed in on with the optical zoom (1x - 18x), extra optical zoom
SW395 SC385 SC384
Operating Instructions
/
91