Table of Contents
Advertisement
DS7200V2-EXP | Installation Guide | 2. System Installation
and Setup
Distance from the control panel is determined by
the total combined wire length of all devices
(including keypads) connected to the control
panel's Data Bus terminals. The combined wire
length must not exceed 305 m (1007.7 ft) using
0.8 mm (#22 AWG) wire.
2.7.4
DX3010 Wiring
See Table 11 for Data Bus wire length
requirements.
Table 11:
DX3010 Wire Lengths
Power
Source
Control Panel
Control
to DX3010
Panel
Control Panel
Externa
to DX3010
l Power
Supply
External Power
Supply to
DX3010
Figure 40:
DX3010 to Control Panel
Wiring
1
Y
G
B
R
NC
C
NO
8
1- DX3010 Module
2- Control panel board
3- Yellow (Y) data wire
4- Green (G) data wire
5- Black (-) wire
6- Red (+) wire
Bosch Security Systems, Inc. | 04/12 | F01U253045-02
0.8 mm
1.2 mm
(#22
(#18 AWG)
AWG)
12.2 m
24.4 m
(40 ft)
(80 ft)
305 m
610 m
(1007.7
(2001 ft)
ft)
12.2 m
24.4 m
(40 ft)
(80 ft)
2
3
4
5
6
BATT+
BATT-
You can use either one of the Aux Power (-)
terminals and either one of the 12 VDC (+)
terminals when connecting devices to the control
panel.
Figure 41:
DX3010 Output States
1
2
1- Output activated state
2- Output deactivated state
If you need to power the DX3010 from an
external power supply, connect it to the power
supply and the control panel.
Figure 42:
DX3010 to Control Panel
Wiring (External Power Supply)
1
3
Y
G
5
B
R
NC
C
NO
8
1- DX3010 Module
2- Control panel board
3- Yellow (Y) data wire
4- Green (G) data wire
5- Black (-) wire
6- Red (+) wire
7- External 12 VDC power supply
EN | 30
NC
C
NO
NC
C
NO
2
4
6
+
-
7
BATT+
BATT-
Hide quick links:
Advertisement
Table of Contents
