Toshiba e-STUDIO350 Service Handbook page 37

5) File sharing related error
(When GM-1010/3010, GM-2010, GM-1060/4060, GM-2060, GM-1061/4060, GM-2061, GM-1120/
4120, or GM-2120 is installed)
Message displayed in
Error code
the TopAccess screen
2D10 Illegal Job status
2D11 Not enough memory
2D12 Illegal Job status
2D13 Illegal Job status
2D14 Invalid parameter specified
2D15 There are too many documents in the
folder. Failed in creating new document.
2D20 Illegal Job status
2D21 Illegal Job status
2D22 Illegal Job status
2D30 Failed to create directory
2D31 Failed to create file
2D32 Failed to delete file
2D33 Failed to create file
2D40 Failed to convert image file format
2D43 Encryption error. Failed to create file.
2D44 Creating the image file was not permit-
ted.
2D60 Failed to copy file
2D61 Invalid parameter specified
2D62 Failed to connect to network destina-
tion. Check destination path
2D63 Specified network path is invalid. Check
destination path
2D64 Logon to file server failed. Check user-
name and password
2D65 There are too many documents in the
folder. Failed in creating new document.
2D66 Failed to process your Job. Insufficient
disk space.
2D67 FTP service is not available
2D68 File Sharing service is not available
2DA0 Expired scan documents deleted from
share folder.
2DA1 Expired Sent Fax documents deleted
from shared folder.
2DA2 Expired Received Fax documents
deleted from shared folder.
2DA3 Scanned documents in shared folder
deleted upon user's request.
2DA4 Sent Fax Documents in shared folder
deleted upon user's request.
2DA5 Received Fax Documents in shared
folder deleted upon user's request.
2DA6 Failed to delete file.
2DA7 Failed to acquire resource.
2DA8 The HDD is running out of capacity for
the shared folder.
2DC0 Job canceled
2DC1 Power failure occurred
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Contents
System access abnormality
Insufficient memory
Message reception error
Message transmission error
Invalid parameter
Exceeding document number
System management module
access abnormality
Job control module access abnor-
mality
Job control module access abnor-
mality
Directory creation failure
File creation failure
File deletion failure
File access failure
Image conversion abnormality
Encryption error
Encryption PDF enforced mode error
File library access abnormality
Invalid parameter
File server connection error
Invalid network path
Login failure
Exceeding documents in folder:
Creating new document is failed.
HDD full failure during processing
FTP service not available
File sharing service not available
Periodical deletion of scanned docu-
ments completed properly.
Periodical deletion of transmitted
FAX documents completed properly.
Periodical deletion of received FAX
documents completed properly.
Manual deletion of scanned docu-
ments completed properly.
Manual deletion of transmitted FAX
documents completed properly.
Manual deletion of received FAX
documents completed properly.
File deletion failure
Resource acquiring failure
Hard disk space in /SHA partition is
nearly full (90%).
Job canceling
Power failure
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 17
07/11
Troubleshooting
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-103
P. 5-104
P. 5-104
P. 5-104
P. 5-103
P. 5-103
P. 5-104
P. 5-104
P. 5-104
P. 5-104
P. 5-104
P. 5-104
P. 5-104
-
-
-
-
-
-
P. 5-103
P. 5-103
-
-
P. 5-104
e-STUDIO350/352/353/450/452/453
2