Toshiba e-STUDIO350 Service Handbook page 449

[EB60] Paper left on the transport path due to multiple feeding
Open the jam access cover. Is there any paper in front of the registration sensor?
| YES Remove the paper.
NO
Is the registration sensor working?
(Perform the input check in the test mode: 03-[FAX]ON/[2]/[A])
| NO 1) Check if the connector of the registration sensor is disconnected.
|
2) Check if either of the connectors CN318 on the LGC board is disconnected.
|
3) Check if the connector pins are disconnected and the harnesses are open
|
|
4) Check if the conductor pattern on the LGC board is short circuited or open
|
|
5) Replace the registration sensor.
|
6) Replace the LGC board.
|
YES
Check the rollers. Replace them if they are worn out.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
circuited.
circuited.
5 - 13
e-STUDIO350/352/353/450/452/453
TROUBLESHOOTING
5