Toshiba e-STUDIO350 Service Handbook page 372

(6) Loosen the screw on the home position sensor plate at the front.
(7) Adjust the position of the front jogging plate home position sensor (S6) with reference to the
index.
EX. 1
If the width is 319 mm in step (4), the difference from the standard is +2 mm, it requires relocation
of the sensor [3] in the direction of arrow A by 2 mm.
EX. 2If the width is 316 mm in step (4), the difference from the standard is -1 mm; it requires relo-
cation of the sensor [3] in the direction of arrow B by 1 mm.
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
Home position
Screw
sensor plate
Fig. 3-117
Sensor
A B
Fig. 3-118
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 84